Product Information - Fibre Fix Repair Wrap

Fibre Fix Repair Wrap

Thinking about our Morgan Pipes etc which may fail at the most inconvenient time..

My wife Ann's Land Rover Defender's engine warning light appeared on  a couple of days ago and its power just fell away. 

This 2.2 Ltr. Ford Puma Engine certainly needs its Turbo.

Its Top 'Turbo to Inter-cooler' Hose had fractured with what looked like a 1" slit running the length of the hose. 

The pipe is made from Fabric Reinforced Rubber and is approximately a foot long. 

Genuine Replacement Hoses cost between £69 and £79 plus vat.

The AA Patrolman made a temporary fix by wrapping the pipe with 4 inch wide 'Fibre Fix'.

The product, which once wetted and wrapped around the pipe sets as hard 'as steel' the advert say.

The Fibre Fix only took about 10 minutes to apply with another 10 to 15 minutes curing time.

The 4" wide version that he used normally costs about £8.00 a pack.

Fibre Fix also offer a Heat Wrap version for such hot parts such as exhaust pipes

Having seen how easy it was to use, both versions could be a useful addition to the Morgan Tool Kit

Frank.

https://www.fiberfix.com/

FiberFix Repair Wrap

100x Stronger Than Duct Tape

FiberFix Repair Wrap combines industrial-strength fiber and specialized resin into a wrap that hardens like steel and provides a permanent fix. 

Simply dip the wrap in water to activate the resin, wrap around what you need to fix, and 10 minutes later it is cured!

• Cure Time: 5-10 minutes (the warmer the water the faster the cure)
•  Water Pressure Rating: Up to 60 PSI
•  Temperature Rating: Between -30° F and 300° F
•  Sandable & Paintable?: Yes!
•  Applications: Water pipes, garden and shop tools, furniture frames, hoses, outdoor gear, camping equipment, sporting equipment...and much more.

FiberFix Heat Wrap

For High Temperature Repairs

FiberFix Heat Wrap is the direct cousin of the Repair Wrap, but can withstand higher temperatures. 

With the Heat Wrap, you also dip the wrap in water to activate the resin. 

However, after wrapping around the broken object, heat must be applied to accelerate the curing time. 

In as little as 1 hour, your high temperature object is fixed!

• Temperature Rating: Up to 850°F!
• Cure Time: Between 1-5 hours (depending on amount of heat applied)
• Sandable & Paintable?: Yes!
•  Applications: Exhaust pipes, hot water pipes, and other high temperature repairs

• 
  
• FiberFix Rigid Patch

Hardens Like Steel

FiberFix Rigid Patch is the other cousin of the Repair Wrap- a fiberglass patch for permanent repairs on flat or hard-to-wrap surfaces. 

Simply apply the patch over the hole and expose to sunlight or UV light (but don't expose before applying!). In 3-5 minutes after exposure, the patch will cure!

• What's Included?: One 3"x 3" patch, One 2"x 8" patch, One 5"x 5" patch
• Cure Time: 5-10 minutes (depending on amount of sunlight/UV exposure)
•  What Surfaces Will It Work On?: Any rigid surface (will not work on flexible surfaces such as fabrics or highly bendable plastic)
•  Sandable/Paintable?: Yes!
•  Applications: Rain gutters, fences, garbage barrels, water tanks, boats, canoes, automotive body, and much more!

FiberFix Video - Fixing a Leaky Pipe

FiberFix Leaky Pipe Fix