22nd October 2013

Update on the Williams Wind Stoppers

from David Harris.

David has received the following three photos and message from Mike Edwards
at Williams Automobiles Ltd about the price for their New Wind stopper
Installation Kit.

From: Mike Edwards

[mailto:Mike@williamsautomobiles.com]

Sent: 22 October 2013 12:45

To: David Harris

Cc: Nick Bussell

Subject: RE: WINDSTOP ...

Apologies David,

I must have forgotten to attach the photos!

The box we provide should survive the rigours of Royal Mail and Couriers alike.

Unfortunately, the price for the Wind Blocker has had to increase to £145 + £12 delivery due to an increase in

manufacturing costs.

As stated before, shipping internationally will have to be worked out on a case by case basis.

I hope this helps, let me know what you think!

Many Thanks

Kind Regards

Mike Edwards

T: 01454 315112

E: mike@williamsautomobiles.com

Talk Morgan Member John Hayes recently purchased this Windstopper from Williams

Morgan. Here are some photos, that John has agreed to share with you all, for your information.

Bellow is a copy of the Fitting Instructions that Williams Morgan sent to John.

http://www.williamspartsshop.co.uk/product/Wind_Blocker_windblock#.UmGqzfnOuSo

Wind Blocker - Quoted on Friday 18th October 2013

Enlarge Image / More
Print Product Info.
Bookmark This Page

Wind Blocker

In Stock
in stock
Ref. Code: windblock
RRP: £125.00

Wind Blocker to fit Morgan Cars. Looks fantastic and helps prevent buffetting.

£125.00 inc. VAT

Delivery Details

Postage Rates United Kingdom (Mainland only exc. Outer regions)

£0-£10.00: £2.50

£10.00-£25.00: £4.50

£25.00-£65.00: £7.50

£65.00-£150.00: £14.50

£150.00-£200.00:£20.00

£200.00+: FREE

...........................................................................................................

Wind Blockers

User Guide

Pack Contents

Fitting Brackets - x4 M8 x 25 Bolts - x4 M8 Nylock Nuts - x8 Washers -

Attaching Swivel Arms - x2 M6 X Short Bolts x2 M6 Nuts

READ THROUGH INSTRUCTIONS FULLY BEFORE COMMENCING WORK.

Firstly lower the roof

Lift/Fold Carpet

Mask inner arch areas

Measure up 3” from the panel

Mark a line

6. Measure 4 ¼“ from edge backwards and mark a line for a centre point

7. Align bottom edge of bracket on line with centre point and mark holes

Drill holes – 8-8.5 mm

Clean trapped wood shavings from behind leather using a small screwdriver or pick

Push 8mm x 25mm bolts with washers through the holes, fit nuts and washers to the inside of the arch above the tyre and then tighten them.

Repeat the same on the other side.

Loosely attach side arms using 6mm short bolts & nuts so that they face backwards.

For older cars that are narrower between the arches, you may have to adjust the wind blocker hinge such that it turns inwards.