Tuesday, 5 November 2019

A Lionel Roberts Alloy Wheel Spinner Removal Tools by David Owens

Up To Date Information from David Owens

During our 10th Anniversary Visit to the Morgan Factory, owner David Owens briefed us on a new Wheel Spinner Removal Tool he had sourced.

" As some of us discussed at the R100 Anniversary weekend the contact details for the alloy wheel spinner removal tool is as follows:


He can make the tool for the octagonal, two eared and three eared spinners. The cost was circa £50 + P&P. "

Photographs attached. You do need a 38mm socket and breaker bar to attach to the tool to remove the spinner. 



The Tool's Working Surface for a Two Ear'd Spinner



The Tool in situ on David's Spinner

The Morgan Aero Owners Wheel Nut Version from Talk Morgan

I too am very wary when removing/re-fitting the Aero wheels.

I have the factory tool and s/s bar but I recently took delivery of this beauty -

maybe not entirely necessary , but beautifully made from a solid billet of aircraft grade aluminium 

I use it with a 3/4 " breaker bar and a 38mm socket.I also have a bit of scaffold tube for extra 'persuasion'

Quote:

Talked to Lionel Roberts, sent him the original wheel tool and...magic: a perfect tool with 38mm socket on which I use an extending ratchet/breaker bar. 

His prices are very reasonable ; not sure what his final price for these will be but expect around same as spinners. He is able to machine to fit 2/3-eared spinners/octagonals as well and up for a challenge on anything else - 

contact: 0794 7712427 or wheelwidget@hotmail.co.uk

I have spoken to Lionel today and he is out of stock of the adaptor but is going to make one up for me in 3 to 4 weeks time.
I said I would mention details on Talk Morgan and if anyone else is interested he can make a batch up at the same time."

Lionel is a real gent;retired and clearly very talented.

He makes up similar items / spinners for the MG club , Jags and other exotica.

He did say he had made one extra tool for 'stock' so you may be lucky if you want one - otherwise it is probably only a few weeks 'till he can make up another batch... 

The Jaguar Owners Story on Valvechatter

Watching a YouTube video by DaveJaguar66, I was introduced to a new tool that Lionel Roberts  makes for this purpose. 
It is machined from aluminum and therefore softer than the chrome spinner and it uses a 1-1/2″ socket and a long Tommy Bar. No more banging with a hammer and risking a missed blow striking bodywork! I have now tried the tool and love it. 
Lionel makes different size tools to accommodate differences in spinner size. As far as I am concerned this is a must-have tool.
So, now instead of a lead hammer, I will be carrying a Tommy Bar, a 1-1/2″ socket and Lionel’s tool in my boot!
Lionel's Spinner Tool In Action


The Jaguar Version


The Lotus Elan Owners Tale.




Just received my " wheel widget" from Lionel ( what a nice bloke ) and am impressed...so set to work to complete the tool ( and weight save 1.6Kg ), what I had in my boot was a torque wrench and home-made spinner socket ( did the job a treat but boy was it heavy - a total of just over 3Kg )

Cut down a box spanner I had lying around and turned down a surplus socket to provide a made to measure 1/2" drive 1 1/2" socket, also took apart an old torque wrench and " grafted" the business end onto a length of thick walled ali.pipe...


Weights (approx)
spinner tool 1600 gms
torque wrench 1500 gms

Wheel widget 480 gms
socket 200 gms
long bar 650 gms

Lionel can be contacted at wheelwidget@hotmail.co.uk and at a good price. 

As someone once said.... Sell the wife,sell the dog and buy one of these..

.you won't be disappointed.

Franks Driving Caps


Frank's Driving Caps

In the February Edition of MOG Magazine we were asked to submit Ideas for Driving Caps.

Here are the selection of Caps that I have for my use.

I prefer the Peak Baseball Cap as they tend to sit more tightly on the Head, resisting 'Fly Off' in the wind.

The Peak itself makes for a very good Sun Visor. Two good reasons for my Choices


My Main Driving Cap - MSCC in Roadster 100 Colours.


My Version of the Original Roadster 100 Register Cap with OxMog Pin Badge.

My New Version Roadster 100 Register Cap sporting our All Morgans' Day Pin Badge


My Night Time Driving Cap from Panther Vision with its Three Bright and selective LED lamps which are great for 
finding the Ignition Key Slot and any Nighttime Map Reading. 


My Smart Donegal Tweed Cap by City Sports Caps also sporting my Brooklands Club Members Pin Badge.


My Simulated Fur Lined Winter Cap with Ear Flaps.


My Help for Heroes Cap used throughout my Around Britain's' Coast Roads Fundraiser


Here is it worn on the trip with my Snood Neck Warmer preparing to make a Circuit of the Great Orm at Llandudno 


My Later Help for Heroes Fundraising Cap sporting the Vale of Evesham St Georges Day Asparagus Run Pin Badge.


Last but not Least, my Ledgerwood Morgan Cap Retainer.

Aluminium Tool Tray - Fitting My Own 'R. Nick Taylor' Tray.



  • Fitting my R. Nick Taylor Aluminium Tool Rack.



  • Some of us have suffered from damaged Tool Trays due to the Differential hitting the lowest part of the Tool Tray Profile and, 
  •  in my case, punching a hole in it.

  • Having seen Nick Taylors marvellous Aluminium Tool Tray a few of us have request Nick to have extra 
  • Trays made for us. 

  • These Two Drawings from Nick, give the dimensions he used for the Roadster 100. He points out that Owners of other Morgan Models need to check these dimensions on their cars before ordering.  

    The manufacturer, Kevin McTighe, will tailor one to fit your needs if you speak to him about it.

  • The Tel No. is:    0161 7637403

    The address is:   Unit 2, The Sawmill, East Street, Bury, BL9 0RU


    or

    mailto:angie.ksaluminium@yahoo.co.uk
  • .


    Cross Section


  • I have only just made time to fit mine but before I did I decided to add an enhancement of my own.
  •  
  • Hopefully the inserts will prove to be useful, but if not, I can always remove it without too much trouble.

  • In my loft, which I am in the process of clearing 32 years of clutter, I found a single sheet of 1mm thick Fibreboard which I have used in my past to make Long Life Patterns for Garment Making.

  • When I checked the current version of this board I was astounded to discover that The Supplier, Morplan, now charge  £32.95 +VAT  for a single sheet and that they have also changed the colour to red.



Not being an engineer, my design is a little 'Heath Robinson' and my Very Rough Sketches were subject to many 
alterations as I discovered how the board reacted to being folded.


Scribbles and Scrawling.

My Plan was to make a series of Box like Trays which each fitted a section of the Tool Tray so that any items stored there would be contained within its Tray.

Not wanting to commit too much time and material before being happy with the idea, I decided to make the Smallest Trays first.



Here are the First Two small trays and the largest in place. Due to the thickness and strength of the card, the Staples I used to fix the corners proved to be a nightmare to insert requiring quite a few 2nd and 3rd goes before getting a 'perfect' staple.




The Largest tray needed the full length of my Sheet of Board and even then there had to be a slight compromise
 on the depth of the end sections to get it to fit the sheet.



This Close Up shows the deep 'Stanley Knife scoring needed to both provide a guide for cutting and to 
aid the folding process.



Here is the Folded and Stapled Deep Tray - You can see the compromise shorter end piece.



Here among the junk in my bedroom office you can see the Large Tray 


The Last Tray to make and fit is the Large Side Tray of which there are also two.

Here is the cut piece of one of them ready to fold and staple.


Here is the Tool Rack with all Seven Trays fitted in position. 

The Last Part of my assembly process is to use this High Adhesive Duct Tape to fix the Trays together and in place. Another 'Heath Robinson' method which may not hold up over time.


Before this stage I have taken the Tray back to the Car and drilled Five Fixing Screw Holes.

The Three Front Holes line up with the Screw Hole locations of the Original Tray.

This Frame is only 1/2in wide offering little room for manoeuvre.

 The Back Two Holes are New Holes in the Upright part of the Back Support Frame which is 
only 3/4in deep

The next stage was to apply strips of adhesive sponge to the underside edges, which in my case was left over sealing strip from fitting a Sink Unit, but Adhesive Draft Excluding Strip would provide the same 'Leveling' function.

My Hood Supporting Rig allows me to work with maximum space. 


Here is the rather messy looking rear axle bay showing the marking on the differential caused by the old tool tray

 Before fixing the new tray I took the opportunity to Spray my Leaf Springs with Castrol Aerosol Motorcycle Grease.

Here is the Tool Tray fixed in place.

 I decided to make the Rear Fixing in the upright section going right through the Lining Tray.



The Side Fixing using the existing Screw Holes is a Temporary Fix using two old French Coins which already 
had a Centre Hole. I did not have any Penny Washers or Shaped Brackets to hand.

The Side Supports on the first 6 of the New Tray were too narrow to reach the existing Screw Holes and the make a full overlap with the Wood Frame. The overlap here on my tray is less than 1/2in each side so too risky to drill new holes.

Apparently, Nick and K&S have now modified these side strips to fit the frame recess exactly.


Here is the finished job. 
Each Box section is loaded with all of the items that I took from the original tray. 

Jack
Jack Handle
Mallet
Wheel Nut Spanner

There is still plenty of extra usable space for numerous additional items. 

I have taken the project one stage further to eliminate the Tea Towels that I used to use to wrap the heavy items. 

I like to make Drawstring Bags from Waterproofed Nylon Fabric. My plan was to make bags for the Jack, The Mallet and the Spanner with a Lining made from Towelling. The Bag for the Jack Handle is made unlined.


Here is the Bag made for the Jack.

  Now the Jack is tucked up inside.

The Jack Handle, The Mallet and The Spanner Bags.

The Jack Bag is seen in the Top of the Photo.

All Four Bags located in the deep trough along with the Warning Triangle Red Box.

The white pad fixed in the centre is an A4 Square of Plastic Foam which will provide a buffer with the wooden lid to stop it rattling.

I hope this information proves useful

Frank Lomax

The Morgan Centenary Roadster 100 Register

The Morgan Centenary Trim Pack

  The Morgan Centenary Trim Pack During The Centenary of The Morgan Motor Company the owners of new Morgans in build were offered the variou...